“The Lightroom Show” is On The Air!
It’s here: it’s finally here! Yup, it’s the first episode of “The Lightroom Show” (our new weekly show hosted by RC Concepcion and me), and we covered a lot of ground in just a short time, with lots of Lightroom tips and tutorials (Programming note: the show will air on Fridays).
We pull our ideas for the show from comments and questions our viewers post here, so thanks for all your input and suggestions so far, and keep ’em comin’. We’ll be working next week to set up a link where you can submit your images to have RC and I take them from start to finish through our Lightroom editing workflow, and I’ll let you know as soon as that’s up and running.
At the end of each episode, we plan on wrapping up with some inspiration by turning you on to a cool photographer and for this, our first episode, we’re proud to feature the travel photography work of Elia Locardi (here’s the link to his site, blamethemonkey.com)
Hope you enjoy the first episode and that it helps you along on your Lightroom journey. 🙂
Have a great weekend everybody and we hope to see you back here on Monday for #9 in Scott’s on-going series for new Lightroom users.
Best,
-Scott and RC
One of my all time special quotes appears very fitting here uccess is nothing more than a few simple disciplines, practiced every day; while failure is simply a few errors in judgment, repeated every day. It is the accumulative weight of our disciplines and our judgments that leads us to either fortune or failure.?Jim Rohn
One word: CATALOG. The LR catalog terrifies me. I don’t know enough about it to be able to fully understand where my photos are, where the edits are, what is critical to backup, what needs to be moved when moving to new hardware, etc., etc., etc.
That’s it. The one thing that keeps me from using this otherwise great tool. So, when is the LR Catalog for Idiots/Dummies/PS Users coming to your show.
Over the life of DOS, then Windows, I’ve no doubts how to handle my photos in standard file system structures where I have total control. I don’t have, nor can I find, that level of educational comfort with LR Catalog.
Maybe I’m the only one, but I don’t think so. But, maybe…
Gary
Love the printing tip, but I recently made a photo album from Blurb which turned out too dark. Searching online, I read about importing print profiles from Blurb into Photoshop, but some pages have more than one photo on them, and sometimes you have a lot photographs for an album due to the many pages. So, is there a quicker or better way than bringing each photograph into Photoshop and adjust via the print profile, then move back to a catalogue in Lightroom for the album? My monitor is calibrated. Too bad Lightroom can’t deal with printer profiles.
Thanks,
Blair
Blair,
I also have a monitor I keep calibrated (once a month). LR does except ICC profiles that can be used as part of soft proofing (small check box on bottom of screen). This has enabled me to send my images off to a Pro Printer Service with results that match my monitor. It also helps to have a daylight lamp to compare as well.
[…] told us about Scott Kelby and RC Conception’s new vidcast-vodcast-tv-series-thingy about Lightroom, Carl pointed us to info about new Nikon DSLR’s, Adam told us about Murray Frederick’s […]
My mind is blown by how much useful information you covered in this short time! I am excited to see more. Thank you so much for the amazing content (both in the Lightroom Show as well as on this blog!)
Thanks, guys. Cool little tips. Really like the White Balance Presets for JPEGs one. Cool idea.
[…] Scott: New KelbyOne Lightroom show […]
I think this is going to be awesome. Excited!!!
I just watched the first episode ITunes and I found it very informative! That R short cut to go to develop mode and crop is something I never heard of! Keep up the great work!
You guys are too far from the camera. Nice set and all, but sort of impersonal. GREAT content!! Great show!!
Great first episode. I am looking forward to future shows.
Loved the show, I have a suggestion for an upcoming episode. I noticed that on RC computer the other day during the blind critiques that he was using an overlay other than the default Thirds Crop Overlay, since their are seven different ones it might be nice to see what the advantages to the others are or why RC preferred the one he was using…
Thanks
Dave
Gentlemen:
While I have the utmost respect for all the work that is involved in putting together regular blog posts, I was forced to apologize to my students for a “fail” in your first episode. Specifically, not mentioning monitor calibration when prints don’t resemble what is seen on screen is too big to overlook. I was embarrassed when Adobe put that “slider to nowhere” in the first place. It was a bad idea when it first arrived and should not be promoted over monitor calibration… just sayin’…
Came here to say exactly that! Well put, Robert Payne. I see this again and again with my students and clients.
Unless and until you are working within a color managed workflow, you will chase your tail all day long and waste a lot of money trying to get prints that match your on-screen display for color and luminance.
Also keep in mind that even when you are properly calibrated for screen and printer the viewing conditions are radically different for transmitted light (your screen) and reflective light (your print).
So, unless you are evaluating that print in a properly lit, color-neutral light box, there’s no way to accurately judge it in comparison to your screen display.
Of course the print is going to look darker compared to your screen until you illuminate it properly. If you don’t have a viewing box, try taking it outside in normal daylight and evaluating it there! Holding it up next to your computer will never be a good way to check a match.
Your transmissive LCD display outputs light at a very constant temperature and luminance level, but your print viewing environment is likely much more variable as far as color temperature and brightness. The brightness of the print will be completely dependent on the brightness of the light that is hitting it whereas your screen will be quite constant.
To deal with this in studio, I have a small 65K LED light-panel that I use to illuminate prints that I am comparing to the calibrated display and when lit correctly, they are damn near perfect matches to their on-screen counterparts.
Calibrate your displays, use profiles for printing, and display your prints in a properly lit environment before you judge them to be too dark.
If you do this, you shouldn’t have to use that “fudge factor” adjustment right before you print.
My 2¢ of course. Your mileage may vary.
Wow – you are both so natural together, fabulous rapport. Given time I bet it could have that old D-Town dynamic where you get really down to business with laughter & lots of kit.
Love it!
Very high definition, too. Could the camera move a bit tighter in… there was an element of “news-desk” in the framing… you were far away.
Love the show guys, so much potential to be uncovered in lightroom that isn’t always obvious. Can’t wait for next week!
I love the show and the tips but I think you need a tighter shot of you guys at the desk, its way to wide and you are too far away
I’d like to watch, but after the initial ad ran all I get is:
Error Loading Media: File Not Found
Hi,
thanks for the new show. Got a question for you: When creating presets in LR I’m unsure to leave the Process Version checked. Because if a new Process Version comes out by the release of a new update of LR, it will use the old Process Version if checked. Am I right? But I want the new (better) Process Version applied to my photos.
Cheers
Markus
How do I access the show? I don’t seem to be able to do it on my computer.
Click on the right pointing triangle in the center of the photo, above “Kelby One” logo. Try a different browser if that doesn’t do it.
Great start guys. Couple of good tips already to speed up workflow! Nice set also, was that a Scott Kelby design? I always have trouble printing for some reason in Lightroom so any printing tips would be great. I can get the print brighter now but I always run into trouble with sizing the print. It seems like you have to do it in three places, maybe you guys have a better method or at least an easy workflow! Thanks!
The JW player that is now being used for all the KelbyOne video assets is not optimal and is definitely not user friendly. I would recommend using YouTube or reverting back to the software being used prior to JW Player.
Tom:
How so? What do you mean optimal and user friendly?
RC
I agree with Tom. I struggled to watch the Grid yesterday. Couldn’t make the video work on my Note 10.1 with either standard browser or Chrome. YouTube just works solidly with everything.
I’m considering moving from Aperture to Lightroom (especially after attending your Shoot Like a Pro Tour in Columbus!), but I haven’t seen how to replace in Lightroom two key features from Aperture: Faces and Places. I think LR has a map, but – does it have any face recognition piece that can help you tag people? If not, what is the alternative – keywording? (hope not, because I’ll follow the advice on LightroomKillerTips about NO KEYWORDING needed!).
You guys rock! Thank you very much!
is there any way to lock a photo star rating to the collection? For example, I give a photo 3 stars in on cut through a shoot. Then in another collection I want to cut through a different way and maybe give it 5 stars. I find this a particular problem when making collections with photos from different shoots for different end use projects.
is there any way to lock a photo star rating to the collection? For example, I give a photo 3 stars in on cut through a shoot. Then in another collection I want to cut through a different way and maybe give it 5 stars. I find this a particular problem when making collections with photos from different shoots for different end use projects.
Hey Guys,
Great show! You know, I’ve used lightroom since v1.0. Never knew about the “R” key. I guess “Crop” and “R” don’t go together. 🙂 Just fyi. I got this tip from Red River Paper. I was having problems with dark prints on their paper so I asked them the question about dark prints. Got a great answer. When I calibrate my monitor, I now set the brightness to 105cd instead of 120cd that is recommended. Before I did this I had to set the brightness in LR to around 30-35 in LR. Now,after testing, I only have to set the brightness to 10. Also, I get better looking prints because the colors aren’t overly saturated when I doing post work.
Again,
Great show.
Dennis
Scott and RC thanks. Really great show. I appreciate all you have done for my learning photography and Lightroom. Kelby One is the best!
Great show, great tips, can’t wait for the next one!
Fantastic first show, can’t wait for next week.
great show!! I have a question. When I transfer a picture from Lr to my phone it comes out darker. What can I do to correct this? Anybody else have this problem?
Thanks for a helpful little show. Looking forward to the next one already.
Brilliant show guys. Just like the old days!
Great show, guys. Timing doesn’t work for me in the UK, darn that employment thing!! Please could you send a podcast link for those of us on windows without iTunes. So excited by the possibilities of this show.
Don’t worry – I found your RSS feed on the KelbyOne TV-Shows page. Well done guys – this is a fully rounded service. Keep it going!
Love the new show. I am so glad you “keep the crop”. The show would not be any good without all the crop. 🙂
You guys nailed it. Nice set design too.
Under 10 minutes and full of useful tips. Already looking forward to the next one! Thanks guys!!
Love ‘show’. Just the right length. Thanks.
I really enjoyed the show. Loved the tip on brightness because I encounter that issue all the time. I have another printing question, should you size the photo for the print size (i.e., if I am printing a 16×24 canvas should I size the print to 16×24)? Or is that irrelevant?
Hey guys, I love how you are staying current. It doesn’t matter what anyone says, staying current is what makes a business succeed. As much as I love photoshop and have used it from its infancy, Lightroom is where its at right now. Top marks.
All the best,
Ross
http://www.rosshurley.com
hey Guys thanks for the great show! I’m an using Lightroom from version 2 and it’s great that I still find tricks and tips that help me with my workflow. Btw Elia is the best I love his work, I was happy to me with him at photokina in Colone!
Great first episode! Great quick hits of information, really struck a nice balance between content and length. I think if you packed much more in there, you’d start to overload and forget some of it.
Thanks for the show!
thanks for another inspiring show. always helpful.
Scott, very good. I like that you guys keep it to under 10 minutes. Easy to watch.
Is there any way to download the episodes for personal use? I’d like to keep them in my video tips library for future reference offline.
Again, thanks and keep up the good work.
Dennis
Regarding the tip on brightening printed photos, it would be great if Adobe added a “TEST” print to the print module where you could select three or more percentages of brightness and have it print selection (or the whole print) with increasing percentage of brightness from left to right. That way you wouldn’t have to waste several sheets of test prints.
That’s a great recommendation. Are you listening Adobe?
You can do that using a 4×5 bleed template and a layout with 4 4×5 on same sheet. (I think I have the terms right…)
Use your 4×5 template to sequentially save individual jpgs, each with increased brightness values (put value in filename…) – then import the 4 jpgs and plug them into the 4-4×5 sheet – print it with no adjustment. ( If you turn on Page – Print Info in your 4×5 template and choose field “Custom” – you can type it in and it will show on the print in text). Maybe that will help save you some paper. I only print at costco and this is how I zeroed in by making 20 4×6 prints with varied brightness and contrast settings one time, and telling them to make no adjustments. Best $4.00 I spent in a long time…
Great show…will this be put on the KelbyOne Youtube channel? I want to easily watch on my Apple TV
Scott & RC- Great stuff! Love the show and the format and the set I recently abandoned Aperture and have used my kelbyone subscription to get up and running with Lr , siand have been an avid reader of this blog ever since. I use Mpix for my prints so does this brightening tip need to be applied if you are saving a print as a JPEG? An episode(s) on creating prints from sizing to delivery would be great! Thanks again!
Florian
I like it! I really enjoy The Grid when I have time; I really like the interplay of personalities. The Lightroom Show on the other hand, seems to be more content-intensive. For me (not all that busy, but still……..) it was nice to go right to the tips and tricks. Thanks Scott and R.C. !
Awesome, the show got to my expectations, nice format not too long right to the point. Long live to the LR Show. But I have a constructive comment to add. The set is great but the camera angle is somewhat too wide it seems you are sitting at 30 feet from the camera, maybe more frequent close up, and the audio sound a little like you are into a cavern.
Carl O.
Hi guys,
I love the Killer tips site and the new lightroom show! Thanks!
One question about the first show. I like the printing 20% brighter tip. Is there a similar way to do this, without going to Ps, when you’re sending it out to be printed? If not, how would you lighten it up for enlargement printing? I just had this happen when I sent out a big enlargement and it came back too dark. Thanks!
Yes, watch the video a little longer and RC shows you the Print Adjustment option in the Print Job panel. Works when saving out to JPG too.
Great show! Looking forward to the others. This may be more of a The Grid idea than for the smaller context of these shows – But, I would love shows on Post Processing Workflows. As you bring in guests, talk through what they do with the photos after they are captured. Every photographer has a different workflow process, it would be very interesting to hear it.
How does an wedding photographer go through their files differently than a sports photographer, etc.
Thanks for the show great tips. A question- when sending your prints to a lab is there an option in Lr to achieve what you did in PScc by duplicating the layer and changing the blend mode to screen, then adjusting the opacity?
Yes, RC shows you the Print Adjustment option in the Print Job panel. Works when saving out to JPG too.
I LIKE IT!!
I can´t watch the video because this site is build using JAVA. Please upgrade to HTML5!!!
Huh? There’s no JAVA on the page. There is Javascript. Javascript is integral to HTML5. Upgrade to a device that can support Javascript and HTML5.
Sorry! It must be a problem with Safari. I could watch the video on Chrome. Thank you!!
I really love the show, and the way you explain every topic is great.
Great show guys! Scott, just happened to notice that you had a Mortal Kombat or Street Fighter inspired preset in your User Preset list called “Finishing Move.” What do you happen to use that for? Final sharpening or something?
I’d love to see you guys do an episode where you compare the various faux grain options we have available through LR, VSCO, Nik Silver Efx etc.
THANK YOU!!!!
Keep it up Scott & RC! I love your show!
Many thanks, Gil. 🙂
[…] http://lightroomktips.wpengine.com/lightroom-show-air/ […]
Great Show RC & Scott!!! Can’t wait till next weeks show….it looks awesome!!!
Thanks Alex. Next weeks will be a little longer I thunk. We’re shooting for 15 min. 🙂
Love the new show !!!! I have a question about “brightness for printing”. I send most of my printing out but I have had the dark print issue as well and specifically in the blurb book module. What do you suggest as a way to lighten all the pics in a book before I send the book to blurb. Thank you for the new show.
We can cover that on an upcoming episode. There is something that can be done, but it takes a little more than just moving a slider. Not a bunch more, but some. We’ll tackle it for you. 🙂
Great first show, the little tips are great. I was thinking the same as Gunnar.
Been using the ‘R’ shortcut since version 1 to bring me to the develop module. Or better said, I just type double ‘R’ and start developing 🙂
Hi.
Liked your tip about dark printing but is there a smart way to fix the same thing for files I send (as JPG) to a lab thats printing my files?
/Gunnar
My advice would be to check that jpg on several displays (another monitor, laptop, cellphone, tablet) so you can compare how it’s the brightness and contrast across them. I tell my allumni to calibrate (with no hardware calibrator) with a warm ambient light behind the monitor, putting contrast to the max and the lowering brightness to a point where it looks comfortable to the eye, then lower the contrast to a same point. Usually helps. But I tell them that nothing beats to have hardware calibrated monitor.
Another software solution that’s avaliable for PC users is Calibraze which does the exact same procedure I mentioned above with great results.
Hi Guys,
great first episode, and I really like the idea of the show.
Following on from RC’s tip about brightening up images for printing, is there something similar that can be done when exporting to a Blurb book?
Cheers,
Paul